Description
Essential Stone Floor Rejuvenator is a natural stone cleaner that creates a fresh, clean surface while providing an additional top-up liquid wax sealing effect. It can be used as a finishing touch on professionally pre-sealed surfaces, protecting against oil and water-based stains. This product conditions, protects, and rejuvenates natural stone with antimicrobial protection.
In summary, Essential Stone Floor Rejuvenator is an eco-friendly natural stone conditioner that enhances the natural beauty of various types of natural stone. It is simple to apply; easily buff into the stone with a clean cloth or sprayer. Suitable for both internal and external use, it also offers added UV protection. Without dilution, it covers up to 30m² per litre.
HOW TO APPLY:
- Preparation: Clear the work surface of any loose debris and ensure you have adequate personal protection, including gloves, protective eyewear, a face mask, and appropriate clothing.
- Patch Test: Perform a brief patch test application in an unobtrusive area to confirm suitability.
- Cleaning: Ensure the surface is entirely dry, clean, and free of any waxes, sealants, or coatings.
- Application: Use a low-pressure sprayer or cloth to apply the product evenly. Allow the solution to penetrate the floor for 10 – 15 minutes before buffing to a low to medium sheen.
- Drying: The surface will be dry to the touch in about 30 – 40 minutes and fully cured in 24 hours. After application, test with water drops; if droplets are absorbed, additional coats may be required. Keep adults, children, and pets away from the area until the product has completely dried.
Please Note: Surfaces not intended to be sealed must be protected with masking tape.
Key Features:
- Versatile Use: Suitable for various natural stone surfaces, both internal and external.
- Enhanced Protection: Provides sealing and protection against oil and water-based stains.
- Antimicrobial Protection: Conditions and protects the stone.
- Coverage: Up to 30m² per litre without dilution.
- Quick Drying: Dries to the touch in 30 – 40 minutes and fully cures in 24 hours.