The high strength stud profile Gypframe 70 I 70 'I' Stud enables the building of stronger and higher partitions without requiring the partition to be widened.
Stronger partitions are necessary for higher buildings, which may result in smaller rooms. Gypframe 70 I 70 'I' Studs, which use 0.7mm gauge metal, are significantly stronger than comparable 'C' studs, enabling the building of taller, more impact-resistant walls without increasing their thickness.
Gypframe 'I' studs are cold-rolled steel studs with an 'I' section profile. They include service cut-outs in the web.
These studs provide vertical framing support in British Gypsum partitions and linings, as defined by the system design. They're available in a range of lengths depending on project requirements.
Conforms to EN 14195.